| Product name | General Description | Fluid admitted |
Service pressure range |
Negative pressure range |
Service temperature range |
Page | |
|---|---|---|---|---|---|---|---|
 |
Tube Fitting |
Coming in a great variety of models, the Tube Fitting is standerd type quick-fitting joints for use in pneumatic piping. |
Air, Water (Conditional) |
0~150 psi (0-0.9MPa) |
0~150 psi (0-0.9MPa) |
32~140 F (0~60 C) |
32 |
 |
Tube Fitting Mini Series |
This quick-fitting joint series is 40% smaller thanthe standerd type TubeFitting. |
Air | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
54 |
 |
Tube Fitting Minimal |
The Tube Fitting Minimal Series
is ultra-small, barbed joints for pneumatic piping. |
Air | 0~72psi (0-0.5MPa) for NC Tube 0~43psi (0-0.3MPa) |
-27.6 in.Hg (-93kPa) |
32~122 F (0~50 C) |
64 |
 |
Tube Fitting Stainless SUS316 Series |
Tube Fitting Stainless shows
great chemical resistance. |
Air, Water, etc | Gas 0~145psi (0-1.0MPa) Fluid 0~43.5psi (0-0.3MPa) |
-29.5 in.Hg (-100kPa) |
5~248 F (-15~120 C) |
68 |
|
Tube Fitting Stainless Anti-Corrosive equiv. to SUS303 |
Air | 0~150 psi (0-0.9MPa) |
-27.6 in.Hg (-93kPa) |
32~140 F (0~60 C) |
72 | ||
| Tube Fitting Stainless SUS304 Series |
Air, Chemical (Conditional) |
0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
80 | ||
 |
Tube Fitting Spatter |
This quick-fitting joint is highly
resistant to spatters. |
Air, Water (Conditional) |
0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
88 |
| Tube Fitting Brass | Air, Water (Conditional) |
0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) 32~248 F (0~120 C) |
92 | ||
 |
Die Temperature Control Fitting |
The Die Temperature Control Fitting can be used with thermal oil, clean water, or air. |
Air, Water (Conditional) Heat Medium Oil |
Air 0~150psi (0-0.9MPa) Water, Heat Medium Oil 0~43psi (0-0.3MPa) |
- | Air:32~140 F (0~60 C) Water:32~210 F (0~99 C) Heat Medium 0il 32~248 F (0~120 C) |
96 |
| Tube Fitting Long Type |
Air, Water (Conditional) |
0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
106 | ||
 |
Tube Fitting EG |
Tube Fitting EG is mode of electro- conductive resin. |
Air | 0`0.6MPa | -29.5 in.Hg (-100kPa) |
32~104 F (0~40 C) |
108 |
 |
Main Block |
This assembly type manifolddd is used for concentrated branching. |
Air | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
112 |
 |
2-Circuit Junction |
One block serves tow lines which can have different colors. |
Air, Water (Conditional) |
0~150 psi (0-0.9MPa) |
- | 32~140 F (0~60 C) |
120 |
 |
Connector |
Simultaneous connection and disconnection of multiple tubes makers piping work easier after relocation odfpneumatic devices. |
Air | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
124 |
 |
Light Coupling |
The Light Coupling can be connected with only one hand and is exchangeable with couplings made by other manufacturers. |
Air, Water (Conditional, only E3, E7) |
0~150 psi (0-0.9MPa) |
- | 32~140 F (0~60 C) |
126 |
 |
Stop Fitting |
The stop mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. |
Air | 0~150 psi (0-0.9MPa) |
- | 32~140 F (0~60 C) |
132 |
 |
Rotary Joint |
The Rotary Joint are quick-fitting joints designed for swinging or rotating connections. |
Air | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
134 |
 |
High Rotary Joint |
Use the High Rotary Joint for highspeed rotating connection of pnumaticpiping. |
Air | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
136 |
| Multi-CircuitRotary Block | 0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
140 | |||
| Coiling Tube With Twist-Proof Joint |
0~150 psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
142 | |||
 |
Tube Fitting Clean Room Ready |
Application of non-spattering lubrication and electroless nickel plating is optimal for clean-room use. |
Air | Standard, Mini 0~150psi (0-0.9MPa) |
-29.5 in.Hg (-100kPa) |
32~140 F (0~60 C) |
144 |
| Tube Fitting Mini Series Clean Room Ready |
152 | ||||||
| Tube Fitting Minimal Clean Room Ready |
Minimal 0~72 psi (0-0.5MPa) |
158 | |||||
 |
Color Cap |
In concentrated multiple piping, color caps can be used to indentify differrent applications of the joints. Piping work becomes easier if the tubes use the same color. |
- | - | - | - | 162 |